Don Dye Company, Inc.
P.O. Box 107    Kingman, KS 67068
(620) 532-3131    fax: (620) 532-2141
info@dondyeco.com

< Back
 
 

Unground Ball Bearings.

This bearing is used in a wide range of applications, such as: by grain auger and farm equipment manufacturers in wheels, conveyers, lawn mowers, idler pulleys, etc.  It has been used, very successfully at speeds up to and exceeding 2500 RPM in such uses as V belt tightener pulleys.  They are made primarily for straight radial service, however, due to deep ball grooves they are being used for thrust loads as well. This bearing is constructed with more accuracy, heavier heat treatment and held to closer tolerances than the average unground ball bearing.  The ball race ways are machine formed to a smooth finish, the outer races stamped and coined from cold rolled steel.  These are then heat treated to a uniform hardness for long wearing ability.  They contain a full compliment of balls and are furnished either shielded and grease packed or shielded and grease packed with neoprene seals.

Part No.

A
+.005
-.000

B
+.005
-.000
C
+.010
-.010
D E F
+.010
-.010
G H
Neoprene
Seals
I
Metal
Shielded
No of Balls Size of Balls
ESF 16-32 1.00 2.00 .430 2.125 1.210 .700   Yes Yes 18 .250
SF 16-32 1.00 2.00 .430 2.125 .720 .203 .093 Yes Yes 18 .250
F 16-32 1.00 2.00 .430 2.125 .720 .203 .093 No Yes 18 .250
ESF 14-32 1.00 2.00 .430 2.125 1.210 .700   Yes Yes 18 .250
SF 14-32 .875 2.00 .430 2.125 .720 .203 .093 Yes Yes 18 .250
F 14-32 .875 2.00 .430 2.125 .720 .203 .093 No Yes 18 .250
ESF 12-32 .750 2.00 .430 2.125 1.210 .700   Yes Yes 18 .250
SF 12-32 .750 2.00 .430 2.125 .720 .203 .093 Yes Yes 18 .250
F 12-32 .750 2.00 .430 2.125 .720 .203 .093 No Yes 18 .250
F 12112 .500 1.50 .375 1.594 .531 .411 .067 No No 16 .187
F 58112 .625 1.50 .375 1.594 .531 .411 .067 No No 16 .187

 

View our entire catalog!


 

 


Copyright 2004 Don Dye Company, Inc.  { All Rights Reserved }
webmaster@dondyeco.com